Description
Recently, we are working on one project with NodeMCU and just wanted to change the SSID of the Wi-Fi access point.
As usual, we change the SSID in the code and upload it to the NodeMCU board, But when we test it wouldn’t change the SSID name.
It still shows the old SSID, which means it still had the old project data that we used in the last project.
In this case, we know there is an option to erase all memory in NodeMCU like factory reset.
Every time when we program ESP32, Arduino IDE rewrite the code on existing one, because, if it has to perform Erase, it would have taken lot of time i.e. 1-2 minutes based on data presence. If we are constantly making changes in the code, programming ESP32 would have become so much time consuming.
When we need to Erase Flash Memory?
There are multiple scenarios, where we need to erase ESP32 flash memory.
When we are switching from Arduino programming to Python programming.
Code is not uploading properly.
ESP32/ NodeMCU crashing randomly.
Old code configuration visibility i.e. Wi-Fi SSID, etc.
Random behaviour of the firmware.
Does Erasing Flash removes the Bootloader?
Answer is no. The Bootloader is stored in secure and hidden space in the flash memory and it shouldn’t be erased.
Just for information, What will happen if the ESP32 bootloader erased?
ESP32 will become lifeless, repairing it will become complex task. ESP32 won’t accept any code, it won’t be detected on COM port. Whatever the code in it, it won’t execute.
Another question asked is, does erasing flash reduces the Flash memory Lifespan?
As we know, Flash memory has some limit of Read/Write cycles. If we go through the Flash memory datasheet, it’s around 10K to 100K. It’s huge. Also it depends on how much data presence in flash, if it’s small, it will only affect that small portion of flash. Considering 100k lifecycles and every 15 mins erase cycles, and 128Kb data portion in flash, it will take more than 1000 years to end its lifespan.
Now that we understood why we need to erase the ESP32 and it’s safe to do so, Let’s see how to erase flash:
We will need esptool to earase flash memory of ESP32. Let’s install it.
Erase NodeMCU (ESP8266) flash memory with Windows
Step 1
Download Python for Windows on your computer using the below link and install it.
Step 2
Now open the command prompt. To open it press the windows button on your keyboard and type cmd
Now click on the command prompt to open it
Step 3
In this step, we will install esptool using a command prompt to install it copy the below command and paste it onto the command prompt.
Note: make sure your python version and correct it on the command.
In our example, we installed python 3.10 so we have entered py -3.10 on command.
py -3.10 -m pip install esptool
Step 3
Copy the below command and paste it onto the command prompt.
py -3.10 -m esptool
Step 4
Connect your NodeMCU board to your computer.
Step 5
This command is to erase the NodeMCU flash memory.
Now copy the below command and paste it into the command prompt, before entering make sure your com port, my NodeMCU board is connected to COM8, if you have a different com port then current it on the command line and press enter.
py -3.10 -m esptool --chip ESP8266 --port COM8 erase_flash
コメント