Half bridge weight sensor (load cell) of measurements range up to 50 kg. It can be used for measuring weight, linear force, or even thrust.
 
50kg Half-bridge Experiments Body Scale Load Cell Sensor is measuring; the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the intermediate, adhesive coating with white beam arms); and the outer edges to form a shear force in the opposite direction, i.e., middle strain beam bending necessary changes can occur under stress, strain beam side by another force should not be a barrier.
 
You can use multiple load sensors simultaneously to increase the capacity range, Parallel use to add additional capacity.
 
The sensor can be used with  the following three methods:
Using a sensor with an external resistor’s full-bridge measurement range of a sensor range: 50kg. Higher requirements for an external resistor.
The uses of only two full-bridge sensors measuring range are the range of the two sensors and: 50kgx2 = 100kg.
The use of four full-bridge sensors measuring range is the range of four sensors and: 50kgx4 = 200kg.
Features:
High accuracy,
Simple structure,
Simple installation.
Internal 1000Ohm half-bridge strain gauge load cell, the range is 50kg, half-bridge structure.